Maintaining your quality purchase will
repay you by keeping its beauty for many years.
Vacuum regularly.
Frequent vacuuming is a wool carpet's best friend.
In most cases, a suction only canister vacuum is best to
prevent excess pilling and fuzzing. However, if this
type is not available, set vacuum so that the brush is
furthest away from the surface of the carpet.
Remove spills immediately.
Professionally clean as needed. Do not apply stain
repellent treatments that contain silicone because they
tend to accelerate carpet soiling.
Keep doormats clean.
Exercise preventative maintenance by placing absorbent
mats at the most frequently used entrances to your home.
Change or launder when these mats become soiled.
The vacuum cleaner dust bag should be changed when half
full.
Filters in your heating and air conditioning systems
should be changed regularly.
Cleaning
One of the most crucial areas of carpet maintenance
is removal of spots and spills. Acting quickly when
anything is spilled or dropped, and always having the
necessary cleaning materials at hand are of the utmost
importance.
STEPS FOR SPOT REMOVAL:
Immediately blot (do not rub) spills with white
paper towels or with a clean absorbent cloth. Scoop up
solids.
Pretest spot-removal in an inconspicuous area.
Apply the cleaning agent listed on the spot removal
chart (next page) to an absorbent towel and begin to
blot up the spill with a blotting motion. Flip cloth to
prevent reapplying soil.
Do not over saturate with water.
Work inwards from the edge of the spot to prevent
excess spreading.
Wait a few minutes for the cleaning agent to work on
the spot. Follow recommended directions.
Once the cleaning agent has removed the spot, blot
excessive moisture by applying pressure with paper
towels or a dry absorbent cloth.
Rinse with clear water on a clean cloth.
Remove excess moisture by applying pressure with
paper towels.
FOR DRY CLEANING ONLY PRODUCTS:
We recommend a dry cleaning agent such as Capture®,
Host® and Dri-Mate® or the WoolClean Spot Dry RemoverTM
available from Wools of New Zealand.
Top
Test area first.
Vacuum brush should barely skim surface carpet to
trap soil just under pile. (Any further aggressive brush
setting will cause carpet to pill).
Note: Please be aware that although the products in
the Royal Woven Collection are listed as 100%
polypropylene, they are flat woven, with natural fiber
(jute) backing materials that are exposed on the face.
Therefore, the proper maintenance on these products
calls for Dry Clean Only. Wet cleaning (i.e. hot water
extraction) can cause shrinkage, discoloration of the
jute, and wicking of the jute color onto the surface
pile.
STAIN TREATMENT CHART:
TYPES OF TREATMENT
1.Add cold water and blot
2. Detergent solution or WoolClean Dry Spot Remover™
#1*
3. Methylated mineral spirits, turpentine, or
WoolClean Dry Spot Remover™ #2*
4. Chill with aerosol freezing agent or ice cubes in
a plastic bag; follow by picking or scraping off gum
5. Warm water
6. Clean nail polish remover (preferably acetone)
7. Sopropyl alcohol
8. Rust remover
9. Absorbent powder (e.g., salt, talc or Absorb-It™*)
10. Absorbent cleaner (Wool Clean Spot Dry Remover™,
Host®, Capture® or Dri-Matic®)